Drill Bushing Search

Click on following link Drill Chart for decimal sizing.


drillchartinch
drillchartinch

Bushing Search - Inch

  • 1 Input letter of bushing style type (P = Press Fit) and a dash...P-
  • 2 Input bushing O.D. in 64th's of an inch (20=5/16") and a dash...P-20-
  • 3 Input bushing length in 16th's of an inch (8=1/2") and a dash... P-20-8-
  • 4 Input bushing I.D. in 10,000th's of an inch (.1250=1/8")... P-20-8-.1250

Bushing Search - Metric

  • 1 Input letter of bushing style type (PM = Press Fit) and a dash...PM-
  • 2 Input bushing O.D. in mm's (8) and a dash...PM-8-
  • 3 Input bushing length in mm's (12) and a dash... PM-8-12-
  • 4 Input bushing I.D. in two decimal mm's (4.50)... PM-8-12-4.50




Lockscrews & Clamps

Lockscrews

lockscrew

The most popular locking method for renewable type bushings. Used on either the "slip" or "fixed" side for a slip/fixed bushing. Available in inch, metric or thinwall configurations. Simple, strong, compact and economical. Search lockscrews and clamps: use their corresonding part number, i.e. LS-1.



Standard Mounting USA
Part Number A B C E F Thread
LS-0 7/16 3/16 5/16 3/16 .105/.100 #8-32
LS-1 5/8 3/8 5/8 1/4 .138/.132 5/16-18
LS-2 7/8 3/8 5/8 3/8 .200/.194 5/16-18
LS-3 1 7/16 3/4 3/8 .200/.194 3/8-16
LS-4 1-1/16 7/16 3/4 7/16 .231/.225 3/8-16
LS-5 1-1/8 7/16 3/4 1/2 .263/.257 3/8-16

Standard Mounting - Thinwall USA
Part Number A B C E F Thread
TW-1 7/16 3/16 5/16 3/16 .105/.100 #8-32
TW-2 1/2 1/4 3/8 1/4 .138/.132 #10-32
TW-3 11/16 1/4 7/16 3/8 .200/.194 #10-32
TW-4 7/8 3/8 9/16 1/2 .263/.257 5/16-18
TW-5 1 3/8 5/8 5/8 .325/.319 5/16-18
TW-7 3/4 3/8 5/8 3/8 .200/.194 5/16-18

Metric Standard Mounting
Part Number A B C E F Thread
LSM-1 15mm 7.5mm 13mm 6mm 3.3mm M5
LSM-3 18mm 9.5mm 16mm 8mm 4.3mm M6
LSM-5 22mm 12mm 20mm 10mm 5.8mm M8
LSM-7 32mm 15mm 24mm 12mm 7.3mm M10

Metric Projected Mounting
Part Number A B C E F Thread
LSM-2 18mm 7.5mm 13mm 9mm 6.3mm M5
LSM-4 22mm 9.5mm 16mm 12mm 8.3mm M6
LSM-6 27mm 12mm 20mm 15mm 10.8mm M8
LSM-8 38mm 15mm 24mm 18mm 13.3mm M10

Round Clamps

round clamp

A round clamp is used on the "fixed" side of a SF bushing. They have less clearance under head thereby providing a tighter clamping force to the the bushing. Each round clamp is used in conjuction with a socket head cap screw.



Standard Mounting (USA)
Part Number A B D E F G SHCS Replaces Lockscrew
RC-01 5/8 5/16 5/32 17/32 .109 .125 5/16-18 LS-1
RC-02 5/8 7/16 7/32 29/32 .125 .188 5/16-18 LS-2
RC-03 3/4 1/2 9/32 1-13/32 .156 .188 3/8-16 LS-3
RC-04 3/4 17/32 1/4 2-1/2 .156 .219 3/8-16 LS-4
RC-05 3/4 9/16 1/4 2-1/2 .156 .250 3/8-16 LS-5

Metric Standard Mounting
Part Number A B D E F G SHCS Replaces Lockscrew
RCM-1 13mm 8mm 4mm 9.5mm 2.8mm 3mm M5 LSM-1
RCM-3 16mm 10mm 5mm 15mm 3.3mm 4mm M6 LSM-3
RCM-5 20mm 12mm 5mm 30mm 3.8mm 5.5mm M8 LSM-5
RCM-7 24mm 16mm 7mm 80mm 4.5mm 7mm M10 LSM-7

Metric Projected Mounting
Part Number A B D E F G SHCS Replaces Lockscrew
RCM-2 13mm 11mm 4mm 9.5mm 2.8mm 6mm M5 LSM-2
RCM-4 16mm 14mm 5mm 15mm 3.3mm 8mm M6 LSM-4
RCM-6 20mm 17mm 5mm 30mm 3.8mm 10.5mm M8 LSM-6
RCM-8 24mm 22mm 7mm 80mm 4.5mm 13mm M10 LSM-8

Round End Clamps

round end clamp

A round end clamp is a heavy duty alternative to lockscrews. It allows locating the tapped hole farther away from the bushing to avoid interference with a larger liner. Use on either the "slip" or "fixed" side of a slip/fixed renewable bushing. Available in two heights: standard for recessed liner mounting or tall for projected head liner mounting. The clamp is used in conjuction with a socket head cap screw (SHCS).




Standard Mounting (USA)
Part Number A B D E F G SHCS R
RK-01 7/16 3/4 5/8 5/16 3/16 1/8 1/4-20 5/16
RK-02 1/2 3/4 5/8 3/8 1/4 3/16 1/4-20 5/16
RK-03 5/8 1 3/4 3/8 5/16 3/16 5/16-18 3/8
RK-04 11/16 1-1/8 3/4 7/16 5/16 7/32 3/8-16 3/8
RK-05 11/16 1-1/8 3/4 1/2 5/16 1/4 3/8-16 3/8

Standard Mounting (USA)
Part Number A B D E F G SHCS R
RK-10 7/16 3/4 5/8 3/8 3/16 7/32 1/4-20 5/16
RK-11 7/16 3/4 5/8 3/8 3/16 1/4 1/4-20 5/16
RK-12 1/2 3/4 5/8 1/2 1/4 5/16 1/4-20 5/16
RK-13 1/2 3/4 5/8 1/2 1/4 3/8 1/4-20 5/16
RK-14 5/8 1 3/4 1/2 5/16 3/8 3/8-16 3/8
RK-15 11/16 1-1/8 3/4 5/8 5/16 13/32 3/8-16 3/8
RK-16 11/16 1-1/8 3/4 5/8 5/16 7/16 3/8-16 3/8
RK-17 11/16 1-1/8 3/4 3/4 5/16 15/32 3/8-16 3/8

Flat Clamps

flat clamp

Flat clamps are used to lock FM type fixed-renewable bushings which have a milled locking flat. Available in two heights: standard mounting for recessed liner bushings and tall for projected head liner mounting. Flat clamps are used with either

one or two socket head cap screws (SHCS).



Standard Mounting (USA)
Part Number No. of Holes A B D E F G SHCS
FC-01 1 1/2 7/8 5/8 5/16 3/16 1/8 1/4-20
FC-02 1 5/8 1 1 3/8 1/4 3/16 5/16-18
FC-03 1 5/8 1-1/8 1 3/8 5/16 3/16 5/16-18
FC-04 1 51/64 1-11/64 1-1/4 3/8 27/64 7/32 3/8-16
FC-05 2 51/64 1-11/64 1-3/4 3/8 27/64 7/32 3/8-16
FC-06 1 51/64 1-11/64 1-1/4 1/2 27/64 1/4 3/8-16
FC-07 2 51/64 1-11/64 1-3/4 1/2 27/64 1/4 3/8-16

Projected Mounting (USA)
Part Number No. of Holes A B D E F G SHCS
FC-10 1 1/2 7/8 5/8 3/8 3/16 7/32 1/4-20
FC-11 1 1/2 7/8 5/8 3/8 3/16 1/4 1/4-20
FC-12 1 5/8 1 1 1/2 1/4 5/16 5/16-18
FC-13 1 5/8 1 1 1/2 1/4 3/8 5/16-18
FC-14 1 5/8 1-1/8 1-1/4 1/2 5/16 3/8 3/8-16
FC-15 2 5/8 1-1/8 1-3/4 1/2 5/16 3/8 3/8-16
FC-16 1 51/64 1-11/64 1-1/4 5/8 27/64 13/32 3/8-16
FC-17 2 51/64 1-11/64 1-3/4 5/8 27/64 13/32 3/8-16
FC-18 1 51/64 1-11/64 1-1/4 5/8 27/64 7/16 3/8-16
FC-19 2 51/64 1-11/64 1-3/4 5/8 27/64 7/16 3/8-16
FC-20 1 51/64 1-11/64 1-1/4 3/4 27/64 15/32 3/8-16
FC-21 2 51/64 1-11/64 1-3/4 3/4 27/64 15/32 3/8-16

We accept:


Drill Bushing HQ
Order line: 1-888-365-0906
Fax: 414-529-3745
email: sales@drillbushinghq.com

Sale Terms & Conditions

Copyright © 2013 Drill Bushing HQ. All Rights Reserved.