Drill Bushing Search
Click on following link Drill Chart for decimal sizing.
Bushing Search - Inch
- 1 Input letter of bushing style type (P = Press Fit) and a dash...P-
- 2 Input bushing O.D. in 64th's of an inch (20=5/16") and a dash...P-20-
- 3 Input bushing length in 16th's of an inch (8=1/2") and a dash... P-20-8-
- 4 Input bushing I.D. in 10,000th's of an inch (.1250=1/8")... P-20-8-.1250
Bushing Search - Metric
- 1 Input letter of bushing style type (PM = Press Fit) and a dash...PM-
- 2 Input bushing O.D. in mm's (8) and a dash...PM-8-
- 3 Input bushing length in mm's (12) and a dash... PM-8-12-
- 4 Input bushing I.D. in two decimal mm's (4.50)... PM-8-12-4.50
Bushing Type: Press Fit
| #80 to 1/4" | +.0001/+.0004 | .35 to 3mm | +.002/+.008mm |
| +1/4 to 3/4" | +.0001/+.0005 | +3 to 6mm | +.004/+.012mm |
| +3/4 to 1-1/2" | +.0002/+.0006 | +6 to 10mm | +.005/+.014mm |
| +1-1/2 to2-3/4" | +.0003/+.0007 | +10 to18mm | +.006/+017mm |
| +18 to 30mm | +.007/+.020mm | ||
| +30 to 50mm | +.009/+.025mm | ||
| +50 to 80mm | +.010/+.029mm | ||
| +80 to 120mm | +.012/+.034mm | ||
| Reamer ID Tolerances | |||
| #60 to 1/4" | +.0005/+.0008 | 1 to 3mm | +.006/+.012mm |
| +1/4 to 1" | +.0006/+.0010 | +3 to 6mm | +.010/+.018mm |
| +1 to 1-1/2" | +.0008/+.0012 | +6 to 10mm | +.013/+.022mm |
| +10 to18mm | +.016/+.027mm | ||
| +18 to 30mm | +.020/+.033mm | ||
Type P press fit headless bushings are the most popluar and least expensive. They offer a wide variety of configurations. Standard I.D.'s are in drill size fractions, letters and numbers. Standard O.D.'s come ground finished ready for insertion or unground enabling customer to finish grind to their O.D. specifications. Standard sizing and ANSI part numbers for P type bushings are listed in the table below.
| ID Range | Outside Diameter | Length | ANSI Part Number |
|---|---|---|---|
| .0135-.0291 #80-#70 .35-.70mm |
5/32 .1578-.1575 (.166-.161 Ung.) |
1/4 | P-10-4 |
| 5/16 | P-10-5 | ||
| 3/8 | P-10-6 | ||
| 1/2 | P-10-8 | ||
| .0292-.0519 #69-3/64 .75-1.25mm |
1/4 | P-10-4 | |
| 5/16 | P-10-5 | ||
| 3/8 | P-10-6 | ||
| 1/2 | P-10-8 | ||
| 3/4 | P-10-12 | ||
| .0520-.0625 #55-1/16 1.30-1.60mm |
1/4 | P-10-4 | |
| 5/16 | P-10-5 | ||
| 3/8 | P-10-6 | ||
| 1/2 | P-10-8 | ||
| 3/4 | P-10-12 | ||
| .0520-.0634 #55-1/16 1.30-1.60mm |
3/16 .1891-.1888 (.201-.197 Ung.) |
1/4 | P-12-4 |
| 5/16 | P-12-5 | ||
| 3/8 | P-12-6 | ||
| 1/2 | P-12-8 | ||
| 5/8 | P-12-10 | ||
| 3/4 | P-12-12 | ||
| .0635-.0995 #52-#39 1.65-2.50mm |
1/4 | P-12-4 | |
| 5/16 | P-12-5 | ||
| 3/8 | P-12-6 | ||
| 1/2 | P-12-8 | ||
| 5/8 | P-12-10 | ||
| 3/4 | P-12-12 | ||
| .0135-.0291 #80-#70 .35-.70mm |
13/64 .2046-.2043 (.213-.208 Ung.) |
1/4 | P-13-4 |
| 5/16 | P-13-5 | ||
| 3/8 | P-13-6 | ||
| 1/2 | P-13-8 | ||
| .0292-.0519 #69-3/64 .75-1.30mm |
1/4 | P-13-4 | |
| 5/16 | P-13-5 | ||
| 3/8 | P-13-6 | ||
| 1/2 | P-13-8 | ||
| 3/4 | P-13-12 | ||
| .0520-.0634 #55-1/16 1.35mm-1.60mm |
1/4 | P-13-4 | |
| 5/16 | P-13-5 | ||
| 3/8 | P-13-6 | ||
| 1/2 | P-13-8 | ||
| 3/4 | P-13-12 | ||
| 1 | P-13-16 | ||
| .0635-.0995 #52-#39 1.65-2.50mm |
1/4 | P-13-4 | |
| 5/16 | P-13-5 | ||
| 3/8 | P-13-6 | ||
| 1/2 | P-13-8 | ||
| 3/4 | P-13-12 | ||
| 1 | P-13-16 | ||
| 1-3/8 | P-13-22 | ||
| .0980-.1406 #40-9/64 2.50-3.50mm |
1/4 .2516-.2513 (.265-.260 Ung.) |
1/4 | P-16-4 |
| 5/16 | P-16-5 | ||
| 3/8 | P-16-6 | ||
| 1/2 | P-16-8 | ||
| 5/8 | P-16-10 | ||
| 3/4 | P-16-12 | ||
| 1 | P-16-16 | ||
| 1-3/8 | P-16-22 | ||
| 1-1/2 | P-16-24 | ||
| 1-3/4 | P-16-28 | ||
| .1250-.1935 1/8-#10 3.20-4.90mm |
5/16 .3141-.3138 (.327-.322 Ung.) |
1/4 | P-20-4 |
| 5/16 | P-20-5 | ||
| 3/8 | P-20-6 | ||
| 1/2 | P-20-8 | ||
| 5/8 | P-20-10 | ||
| 3/4 | P-20-12 | ||
| 1 | P-20-16 | ||
| 1-3/8 | P-20-22 | ||
| 1-1/2 | P-20-24 | ||
| 1-3/4 | P-20-28 | ||
| .1935-.2280 #10-#1 4.90-5.80m |
3/8 .3766-.3763 (.390-.385 Ung.) |
1/4 | P-24-4 |
| 5/16 | P-24-5 | ||
| 3/8 | P-24-6 | ||
| 1/2 | P-24-8 | ||
| 5/8 | P-24-10 | ||
| 3/4 | P-24-12 | ||
| 1 | P-24-16 | ||
| .1875-.2570 3/16-F 4.75-6.50mm |
13/32 .4078-.4075 (.421-.416 Ung.) |
1/4 | P-26-4 |
| 5/16 | P-26-5 | ||
| 3/8 | P-26-6 | ||
| 1/2 | P-26-8 | ||
| 3/4 | P-26-12 | ||
| 1 | P-26-16 | ||
| 1-3/8 | P-26-22 | ||
| 1-1/2 | P-26-24 | ||
| 1-3/4 | P-26-28 | ||
| .2340-.2900 A-L 5.90-7.40mm |
7/16 .4392-.4389 (.453-.448 Ung.) |
1/4 | P-28-4 |
| 5/16 | P-28-5 | ||
| 3/8 | P-28-6 | ||
| 1/2 | P-28-8 | ||
| 5/8 | P-28-10 | ||
| 3/4 | P-28-12 | ||
| 1 | P-28-16 | ||
| .1875-.3160 3/16-O 4.75-8.00mm |
1/2 .5017-.5014 (.520-.515 Ung.) |
1/4 | P-32-4 |
| 5/16 | P-32-5 | ||
| 3/8 | P-32-6 | ||
| 1/2 | P-32-8 | ||
| 3/4 | P-32-12 | ||
| 1 | P-32-16 | ||
| 1-3/8 | P-32-22 | ||
| 1-1/2 | P-32-24 | ||
| 1-3/4 | P-32-28 | ||
| 2-1/8 | P-32-34 | ||
| .2950-.3438 M-11/32 7.50-8.75m |
9/16 .5642-.5639 (.582-.577 Ung.) |
1/4 | P-36-4 |
| 5/16 | P-36-5 | ||
| 3/8 | P-36-6 | ||
| 1/2 | P-36-8 | ||
| 5/8 | P-36-10 | ||
| 3/4 | P-36-12 | ||
| 1 | P-36-16 | ||
| .3125-.4375 5/16-7/16 7.90-11.00mm |
5/8 .6267-.6264 (.645-.640 Ung.) |
1/4 | P-40-4 |
| 5/16 | P-40-5 | ||
| 3/8 | P-40-6 | ||
| 1/2 | P-40-8 | ||
| 5/8 | P-40-10 | ||
| 3/4 | P-40-12 | ||
| 1 | P-40-16 | ||
| 1-1/4 | P-40-20 | ||
| 1-3/8 | P-40-22 | ||
| 1-1/2 | P-40-24 | ||
| 1-3/4 | P-40-28 | ||
| 2-1/8 | P-40-34 | ||
| .3125-.5312 5/16-17/32 7.90-13.50mm |
3/4 .7518-.7515 (.770-.765 Ung.) |
1/4 | P-48-4 |
| 5/16 | P-48-5 | ||
| 3/8 | P-48-6 | ||
| 1/2 | P-48-8 | ||
| 5/8 | P-48-10 | ||
| 3/4 | P-48-12 | ||
| 1 | P-48-16 | ||
| 1-1/4 | P-48-20 | ||
| 1-3/8 | P-48-22 | ||
| 1-1/2 | P-48-24 | ||
| 1-3/4 | P-48-28 | ||
| 2-1/8 | P-48-34 | ||
| 2-1/2 | P-48-40 | ||
| .5000-.6562 1/2-21/32 12.50-16.50mm |
7/8 .8768-.8765 (.895-.890 Ung.) |
5/16 | P-56-5 |
| 3/8 | P-56-6 | ||
| 1/2 | P-56-8 | ||
| 5/8 | P-56-10 | ||
| 3/4 | P-56-12 | ||
| 1 | P-56-16 | ||
| 1-1/4 | P-56-20 | ||
| 1-3/8 | P-56-22 | ||
| 1-1/2 | P-56-24 | ||
| 1-3/4 | P-56-28 | ||
| 2-1/8 | P-56-34 | ||
| 2-1/2 | P-56-40 | ||
| .5000-.7656 1/2-49/64 12.50-19.50mm |
1 1.0018-1.0015 (1.020-1.015 Ung.) |
1/2 | P-64-8 |
| 5/8 | P-64-10 | ||
| 3/4 | P-64-12 | ||
| 1 | P-64-16 | ||
| 1-1/4 | P-64-20 | ||
| 1-3/8 | P-64-22 | ||
| 1-1/2 | P-64-24 | ||
| 1-3/4 | P-64-28 | ||
| 2-1/8 | P-64-34 | ||
| 2-1/2 | P-64-40 | ||
| 3 | P-64-48 | ||
| .7656-.8438 49/64-27/32 19.50-21.50mm |
1-1/8 1.1270-1.1267 (1.145-1.140 Ung.) |
1/2 | P-72-8 |
| 5/8 | P-72-10 | ||
| 3/4 | P-72-12 | ||
| 1 | P-72-16 | ||
| 1-1/4 | P-72-20 | ||
| 1-3/8 | P-72-22 | ||
| 1-1/2 | P-72-24 | ||
| 1-3/4 | P-72-28 | ||
| .8594-.9375 55/64-15/16 22.00-24.00mm |
1-1/4 1.2520-1.2517 (1.270-1.265 Ung.) |
5/8 | P-80-10 |
| 3/4 | P-80-12 | ||
| 1 | P-80-16 | ||
| 1-1/4 | P-80-20 | ||
| 1-1/2 | P-80-24 | ||
| 1-3/4 | P-80-28 | ||
| 2 | P-80-32 | ||
| .6250-1.0312 5/8-1-1/32 16.00-26.00mm |
1-3/8 1.3772-1.3768 (1.395-1.390 Ung.) |
1/2 | P-88-8 |
| 5/8 | P-88-10 | ||
| 3/4 | P-88-12 | ||
| 1 | P-88-16 | ||
| 1-1/4 | P-88-20 | ||
| 1-3/8 | P-88-22 | ||
| 1-1/2 | P-88-24 | ||
| 1-3/4 | P-88-28 | ||
| 2 | P-88-32 | ||
| 2-1/8 | P-88-34 | ||
| 2-1/2 | P-88-40 | ||
| 3 | P-88-48 | ||
| 1.0156-1.1250 1-1/64-1-1/8 26.00-29.00mm |
1-1/2 1.5021-1.5018 (1.520-1.515 Ung.) |
3/4 | P-96-12 |
| 1 | P-96-16 | ||
| 1-1/4 | P-96-20 | ||
| 1-1/2 | P-96-24 | ||
| 1-3/4 | P-96-28 | ||
| 2 | P-96-32 | ||
| 2-1/4 | P-96-36 | ||
| 1.0000-1.3906 1-1-25/64 25.00-35.00mm |
1-3/4 1.7523-1.7519 (1.770-1.765 Ung.) |
3/4 | P-112-12 |
| 1 | P-112-16 | ||
| 1-3/8 | P-112-22 | ||
| 1-1/2 | P-112-24 | ||
| 1-3/4 | P-112-28 | ||
| 2-1/8 | P-112-34 | ||
| 2-1/2 | P-112-40 | ||
| 3 | P-112-48 | ||
| 1.3750-1.7656 1-3/8-1-49/64 35.00-45.00mm |
2-1/4 2.2525-2.2521 (2.270-2.265 Ung.) |
1 | P-144-16 |
| 1-3/8 | P-144-22 | ||
| 1-1/2 | P-144-24 | ||
| 1-3/4 | P-144-28 | ||
| 2-1/8 | P-144-34 | ||
| 2-1/2 | P-144-40 | ||
| 3 | P-144-48 | ||
